D-Link Canada Now Shipping High Performance Switch for Small-to-Medium Business Networks

OAKVILLE, ON, Jul 22 (MARKET WIRE) --
D-Link Canada, the end-to-end networking solutions provider for consumers
and businesses, today began shipping a high-performance Power over
Ethernet (PoE) network switch that offers enterprise features but fits
the budgets of small-to-midsized businesses seeking to extend network
connections to difficult-to-reach locations.

The new D-Link(R) xStack(R) DGS-3426P is a stackable managed Layer 2+
switch that can interstack with other members of the xStack 3400 family,
which includes the DGS-3426, 3427 and 3450. Embedded with D-Link's Single
IP Management (SIM) capability, the DGS-3426P switch can be part of a
virtual stack with other SIM-enabled devices, allowing up to 32 devices to
be managed under a single IP.

The D-Link xStack Switch features Redundant Ring Stacking with optional
10-Gigabit modules that can be installed in the open slots to create a
physical stack, with up to 12 units or 576 Gigabit ports available for
configuring per stack. Users can install one or two single-port modules,
depending on whether the linear or fault-tolerant Ring Stacking is
implemented. With each of these ports providing 20Gbps full duplex
transmission on the cost-effective coaxial cable, the DGS-3426P provides
not only high-bandwidth stacking but also a cost control capability that
allows users to add ports strictly on a per need basis.

As with others in the xStack series, the DGS-3426P provides a complete set
of security features that include L2/L3/L4 multi-layer Access Control
Lists and mechanisms to prevent IP spoofing, illegal DHCP servers, and
worm propagation. In addition, it offers Layer 3 IP v4 and v6 Static
Routing to increase network performance and security, and can be part of
the Microsoft NAP's ecosystem to protect the health of the network.

Built-in D-Link ZoneDefense(TM) technology allows businesses to integrate
the switch stack with D-Link NetDefend(TM) firewalls to implement a full
coverage, proactive security architecture.

To solve the challenge and cost of running power to difficult-to-reach
locations, the DGS-3436P is equipped with 24 10/100/1000 BASE-T ports that
support the IEEE 802.3af PoE protocol. The switch is designed to inject up
to 15.4 watts of power per port on all 24 ports for a total of up to 370
watts of available power to support IP phones, access points, network
cameras, and more. For D-Link devices that are not 802.3af compliant, the
D-Link DWL-P50 PoE adapter can be used to supply power to the device
making it fully compatible with any 802.3af compliant switch.

"The xStack DGS-3426P delivers performance, flexibility, security,
multi-layer Quality of Service (QoS), PoE conveniences and redundant power
options that are ideal for SMBs or any growing business," according to
Jerry Balice, vice president of technology for D-Link Canada. "The D-Link
xStack 3400 family combines the ultimate in performance with features
typically found in more expensive chassis-based solutions, all at the
price of a stackable switch."

Other Key Features:

-- Operates as a stand-alone device or part of a scalable stack.
-- Single IP management capability is embedded.
-- Optional 10-Gigabit modules can be installed in open slots to create
uplinks or a physical stack for up to 576-Gigabit ports.
-- Users can install one or two single port modules, providing up to 40
gigabits per second full duplex transmission on coaxial cable.
-- Supports Microsoft NAP and ZoneDefense - "Health Check" mechanisms to
ensure proper user access and prevention of malicious traffic within the
network, without the need for manual intervention from the administrator.
-- Web-based access control and MAC based access control options are
included for clientless access authentication for mobile devices such as
laptops or PDAs.
-- 802.1Q and asymmetric VLAN enhance security and performance.
-- Granular L2/L3/L4 QoS/CoS features support converged applications like
VoIP, ERP, Intranet and video conferencing.
-- Multi-layer L2/L3/L4 per flow bandwidth control and D-Link's Safeguard
Engine(TM) increases overall network serviceability, reliability and
availability by automatically preventing broadcast packets and bulk
traffic.

The D-Link DGS-3426P boasts a robust management and configuration
package, including a user-friendly Web-based graphical user interface
(GUI). In addition to traffic monitoring, it has Web MAC address
browsing, Telnet server, TFTP client, system log and trap/alarm/log
severity control, among others.

Pricing and Availability

The DGS-3426P is available through D-Link Network's solution provider
channels, distributors and by directly contacting the headquarters sales
staff. The manufacturer's suggested retail price (Canadian MSRP) is
$5,106.

About D-Link

D-Link is the global leader in connectivity for small, medium and large
enterprise business networking. The company is an award-winning designer,
developer and manufacturer of networking, broadband, digital electronics,
voice, data and video communications solutions for the digital home, Small
Office/Home Office (SOHO), Small to Medium Business (SMB), and Workgroup
to Enterprise environments. With millions of networking and connectivity
products manufactured and shipped, D-Link is a dominant market participant
and price/performance leader in the networking and communications market.
D-Link's Canadian headquarters are located at 2180 Winston Park Drive, ON
L6H 5W1. Phone: (800) 354-6522 or (905) 829-5033. FAX (905) 829-5223.
Internet www.dlink.ca.

D-Link, the D-Link logo, xStack, ZoneDefense, NetDefense and SafeGuard
Engine are trademarks or registered trademarks of D-Link Corporation or
its subsidiaries in Canada and other countries. All other trademarks or
registered trademarks are the property of their respective owners.
Copyright Copyright 2008. D-Link Corporation/D-Link Canada. All Rights
Reserved.

Copyright 2008, Market Wire, All rights reserved.

-0-