SynQor Announces its latest Technological Breakthrough in a Full Patient Contact...

SynQor Announces its latest Technological Breakthrough in a Full Patient Contact 500W Medical Grade Power Supply

3.5" x 5.25" x 1.63" package achieves a power density of 16.7
Watts per cubic inch at 91% efficiency
BOXBOROUGH, Mass.--(Business Wire)--
SynQor continues its successful entrance into the AC/DC
marketplace with the introduction of its latest product designed
specifically for Medical Applications. The ACuQor(r) AQ0500M series of
off line Power Supplies packs 500W of useable power into just 3.5" x
5.25" x 1.63", which is the World's smallest cardiac care, medical
grade AC/DC converter for this power level. SynQor continues to bring
to the design of its ACuQor series of AC/DC products the same level of
technical innovation that has made it a leader in the DC/DC
marketplace, achieving an efficiency level of 91%. Single outputs of
48V, 36V, 24V or 12V are available to facilitate the use of
Distributed Power Architectures and battery backup, and to directly
drive components such as fans, motors, pumps, lamps and actuators.

The AcuQor family operates over a universal input range of
85-264Vrms and 47-63Hz making it suitable for World-Wide deployment.
Through the use of SynQor's "QorCool" thermal conduction techniques,
full output power is available when attached to a cold plate whose
temperature may not exceed 50degC. A transient power rating of 700W is
also possible for up to 15 seconds. Active Power Factor Correction is
incorporated to a level greater than 0.98 enabling compliance with
IEC/EN61000-3-2. Both Line and Neutral are internally fused.

The AQ0500M series includes versions designed for both BF (direct
patient contact) and CF (direct cardiac contact) applications in
accordance with UL/EN60601-1. Input Earth Leakage Current and type
BF/CF Patient Leakage Current are well below the requirements of the
standard at less than 125uA and 2uA respectively. There is also the
option of ordering defibrillation rated models that incorporate the
minimum output to protective earth creepage & clearance distances and
withstand the defibrillator pulse test guidelines of UL/EN60601-1.
Conducted noise emissions are below Level B limits of EN55011/55022,
FCC part 15.

A 5V "always on" standby power output, a DC power good signal, AC
power good signal, remote enable input, and a fan status output
function are standard. An additional 12V standby rail is also
available in a Triple Output version soon to be announced. Over
current, over voltage and over temperature protection with auto
recovery is also built into the unit. The operating temperature range
is 0 to +70degC.

An industrial grade version is available for those applications
where size, weight, efficiency and reliability are essential.

Sample and production quantities are available immediately with a
stock to 10 week lead-time. The 500W ACuQor medical grade power
supplies are priced at $500 in 500 piece quantities. For additional
information, please contact your local SynQor representative, or visit
us at http://www.synqor.com/

High-resolution photography for this press release available at
http://www.synqor.com/company-press.html

About SynQor

Founded in 1997, SynQor has become the technology, quality and
service leader for high efficiency dc-dc converters for the
telecom/datacom marketplace. The PowerQor, BusQor, DualQor, iQor, and
NiQor product lines, combined with SynQor's unmatched lead-times,
flexibility, design support and lowest total cost of ownership have
become the benchmark sought by SynQor's worldwide customer base.

In 2004, SynQor began its successful entry into the military,
industrial and medical market segments with the MilQor, InQor, and
ACuQor product lines. These new technology leading dc-dc and ac-dc
product lines have enabled customers to realize vast savings in space,
weight and overall system costs while dramatically increasing power
densities and end-system performance. Equally important is the service
and support advantage SynQor has brought to customers in these market
segments.

SynQor is a privately owned U.S. company headquartered in
Boxborough, Massachusetts, which is also the location of all of its
manufacturing operations. SynQor has a design center in Dallas Texas,
and sales/marketing offices in Europe, Singapore, Korea and China.
More information is available on the company's website at
www.synqor.com

SynQor
Patricio Feder, +1-978-849-0600 x1037
Fax: +1-978-849-0602
pfeder@synqor.com

Copyright Business Wire 2008