Percello Introduces 16-User Femtocell SOC at the Femtocells London Event

* Reuters is not responsible for the content in this press release.

Mon Jun 1, 2009 8:01am EDT

Samples are available to selected customers 

RA'ANANA, Israel, June 1 /PRNewswire/ -- Percello Ltd., an Israeli fabless
semiconductor company developing highly integrated and low-cost digital
baseband for UMTS and LTE networks, today unveiled the PRC6500, the second
product in Percello's Aquilo chip family, which offers the capacity and speed
required for enterprise-grade applications.

PRC6500 supports 16 users - double the capacity of competing solutions - while
delivering evolved high speed packet access (HSPA+) data rates of 21.6Mbps and
5.7Mbps and extended cell range optimized for outdoor applications. It is
pin-compatible with Percello's first Aquilo chip - the PRC6000 - an eight-user
HSPA+ device, and can be easily used by Percello customers to offer a low-cost
solution for residential, enterprise and outdoor applications.

"As the first company to bring the most integrated SOC into this market, we
are pleased again to be the technology leaders by introducing PRC6500, the
first worldwide 16-user device.  With the PRC6500, vendors can run a single
product line that supports both the residential and enterprise markets," said
Yoav Volloch, vice president of Product Management at Percello. "As a 16-user
device with sniffing capabilities, the PRC6500 is the only one that enables
low-cost and low-power simultaneous open and closed femtocell on a single
radio. For example, a solution based on PRC6500 can allocate six dedicated
channels for the closed part and 10 for the open part; 14.4Mbps will be
allocated to the closed part and 7.2Mbps to the open."

PRC6500 is compliant with 3GPP HNB specs. It integrates an HSPA+ modem, a
powerful MIPS processor, 3GPP L2 hardware accelerators, IP-SEC accelerators,
embedded secured platform capabilities, a timing and synchronization
mechanism, 2G/3G cognitive radio capabilities and peripherals such as embedded
USIM I/F.

As a member of the Aquilo family, the PRC6500 is based on an advanced process
to deliver the lowest cost and the lowest power femtocell. As such, it does
not require heat sync/airflow or external FPGA logic.

In addition, PRC6500 is a scalable solution. "If you'd like to have a 32- or
64-user offering, you can connect two or four PRC6500s in cascade," Volloch
added. "This is one of the fundamental features of Aquilo architecture."

Aquilo architecture enables UMTS NodeB and RNC functionality to run on a
single die. The family chips contain MIPS24Kc and its peripherals as well as
femtocell L1 engine (FLE), which includes an HSPA+ modem and embedded RF I/F.

About Percello
Percello, a fabless semiconductor company, was founded to provide digital
baseband solutions to the challenges of the 3G/HSDPA/HSUPA/HSPA+/LTE femtocell
and picocell market: cost, power, level of integration, development time, and
flexibility. Percello has vast knowledge in silicon design, software and
3G/HSDPA/HSUPA/HSPA+/LTE communication systems. Percello's architecture
combines programmable multi-processing DSPs and dedicated hardware
accelerators. This approach is optimized for power consumption, cost reduction
and risk minimization. For more information about Percello, please visit
www.percello.com.

Contact:  Theresa Maloney, 1-925-287-1509, theresa@cogentacom.com



SOURCE  Percello

Theresa Maloney, 1-925-287-1509, theresa@cogentacom.com, for Percello
Comments (0)
This discussion is now closed. We welcome comments on our articles for a limited period after their publication.