New Guinea Gold Corporation: Mt Penck Hole MPD042 Intersects 133m at 1.83g/t Gold from Surface

VANCOUVER, BRITISH COLUMBIA, Jun 10 (MARKET WIRE) --
The Mt Penck Project in West New Britain Province, Papua New Guinea, is
60% beneficially owned by New Guinea Gold Corporation (NGG)(TSX VENTURE:
NGG)(FRANKFURT: NG8) and 40% by Vangold Resources Ltd. NGG holds 20%
interest directly, and a 40% interest through its 50% shareholding in
Pacific Kanon Gold Corporation.

The results of the first two diamond core holes in the present Mt Penck
program at Kavola East prospect, MPD039 and MPD040, together with the top
half of MPD042 were given in a Press Release dated 4th June 2009.

The assays for the remainder of hole MPD042 are now available and are
given in the table below. Location data for hole MPD042 was given in the
Press Release dated 4th June 2009.

Drilling is ongoing and funded by partners NGG and Vangold in proportion
to their beneficial interests.

Bob McNeil CEO and Chairman commented; "the length of the intersection in
this hole is exceptional and supports the partner's contention that Mt
Penck could host a substantial gold resource. Kavola East, where drilling
is presently being conducted, is of one of many gold areas at Mt Penck
known from surface sampling. Drilling will proceed to these other areas
in due course."

Drill results from earlier drill programs at Mt Penck are described in
detail in a Press Release dated 24th April 2009 and in an Independent NI
43-101 report at www.newguineagold.ca.

MT PENCK DRILL ASSAY RESULTS
----------------------------

----------------------------------------------------------------------------
----------------------------------------------------------------------------
From To Length Gold Silver Cut Off
Hole No (m) (m) (m) (g/t) (g/t) Grade (g/t)
----------------------------------------------------------------------------
----------------------------------------------------------------------------
MPD042 0 133 133 1.83 3.79 0.2
----------------------------------------------------------------------------
including 13 19.9 6.9 3.97 13.08 0.5
----------------------------------------------------------------------------
including 46.4 48 1.6 5.92 6.29 0.5
----------------------------------------------------------------------------
including 57 61 4 3.39 4.10 0.5
----------------------------------------------------------------------------
including 62 65 3 3.63 3.23 0.5
----------------------------------------------------------------------------
Including 76 79.5 3.5 2.52 1.30 0.5
----------------------------------------------------------------------------
including 81.5 97 15.5 1.32 1.73 0.5
----------------------------------------------------------------------------
including 95 96 1 7.35 1.50 0.5
----------------------------------------------------------------------------
including 99 103.5 4.5 1.65 5.82 0.5
----------------------------------------------------------------------------
including 116 121 5 2.41 5.10 0.5
----------------------------------------------------------------------------
Including 125 133 8 3.85 20.85 0.5
----------------------------------------------------------------------------
including 127.5 130.5 3 8.09 52.50 0.5
----------------------------------------------------------------------------
including 128.5 129.5 1 13.25 101.00 0.5
----------------------------------------------------------------------------
----------------------------------------------------------------------------
NB: True thickness of intersection is unknown.

Drill core is logged and split (all by saw) on site with half core
being dispatched to, and assayed by accredited laboratory ALS-Chemex in
Townsville, Australia. In house and laboratory standards are used for
quality control plus regular check sample assaying.

The information in this release was prepared under the direction of
Robert D. McNeil a Fellow of the Australia Institute of Mines and
Metallurgy and a "qualified person" as defined by National Instrument
43-101. Mr McNeil has read and approves the information contained herein.

NGG has a producing gold mine at Sinivit in Papua New Guinea. Full
details of the Sinivit Project are described in various Press Releases
and an Independent N1 43-101 report dated January 2006 which is available
at www.newguineagold.ca.

For further information on this release or on other NGG projects, contact
Forbes West toll free at 888 655 5532, email forbes@sherbournegroup.ca or
Judith O'Quinn at 604 662 3598, email ngg@telus.net or access our website
- www.newguineagold.ca.

ON BEHALF OF THE BOARD

R.D.McNeil, CHAIRMAN & CEO

Neither TSX Venture Exchange nor its
Regulation Services Provider (as that term in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy of this
release.

Contacts:
New Guinea Gold Corporation
Forbes West
Toll Free: 1-888-655-5532
forbes@sherbournegroup.ca

New Guinea Gold Corporation
Judith O'Quinn
604-662-3598
ngg@telus.net
www.newguineagold.ca

Copyright 2009, Market Wire, All rights reserved.

-0-