AFT Announces Successful Completion of New Fuel Pump
* Reuters is not responsible for the content in this press release.
REDFORD, MI, Oct 05 (MARKET WIRE) --
Alternative Fuel Technology, LLC, a wholly owned subsidiary of
Alternative Fuel Technologies, Inc. (PINKSHEETS: AFTC), announced today
that they have designed and successfully demonstrated a revolutionary new
DME fuel feed pump that eliminates cavitation, lowers pump noise and
improves efficiency.
DME, a new ultra-clean alternative fuel for diesel engines, is a liquefied
gas like propane and must be slightly pressurized to keep it liquid. This
is accomplished by storing DME in sealed containers (propane tanks). When
fuel is pumped out of the tank it has a tendency to cavitate in the feed
pump's inlet, causing noise and a loss of efficiency. Cavitation is a
sudden formation and collapse of bubbles in liquids by means of mechanical
forces, such as those resulting from pump vanes or pistons.
In 2007, AFTC developed a very reliable and compact feed pump for DME and
has many running in engine laboratories and experimental vehicles in Asia,
Europe and the USA. These pumps, however, produce relatively high noise
levels that can be heard within the cabin of a vehicle. AFTC's new pump
eliminates this problem and takes DME fueled vehicles one step closer to
volume production.
ABOUT DME:
DME is a new alternative fuel for diesel engines that totally eliminates
toxic smoke (particulate) emissions and drastically lowers NOx emissions
without the benefit of expensive exhaust aftertreatment devices like
particulate filters and urea regenerated NOx catalysts. The estimated cost
for these devices exceeds $10,000 for medium-duty trucks.
DME can be made from abundant biomass that does not compete with the food
chain at a price that is expected to be fully competitive with petroleum
based diesel fuel. When made from biomass, DME reduces CO2 (greenhouse
gas) emissions by over 90%. President Obama has pledged that the USA will
"implement a domestic cap-and-trade program to reduce greenhouse gas
emissions 80 percent by 2050" with "all pollution credits to be auctioned,
and proceeds will go to investments in a clean energy future, habitat
protections, and rebates and other transition relief for families. DME
promises to play a major part in the reduction of greenhouse gases and
their effects on global climate change.
Safe Harbor Statement: Statements contained in this release, which are not
historical facts, including statements about plans and expectations
regarding business areas and opportunities, acceptance of new or existing
businesses, capital resources and future business or financial results are
"forward-looking" statements. You should not place undue reliance on these
forward-looking statements. Such forward-looking statements are subject to
risks and uncertainties, including, but not limited to, customer
acceptance of our products, our ability to raise capital to fund our
operations, our ability to develop and protect proprietary technology,
government regulation, competition in our industry, general economic
conditions and other risk factors which could cause actual results to
differ materially from those projected or implied in the forward-looking
statements. Although we believe the expectations reflected in the
forward-looking statements are reasonable, they relate only to events as
of the date on which the statements are made, and our future results,
levels of activity, performance or achievements may not meet these
expectations. We do not intend to update any of the forward-looking
statements after the date of this press release to conform these
statements to actual results or to changes in our expectations, except as
required by law.
Image Available: http://www2.marketwire.com/mw/frame_mw?attachid=1079208
Contact:
http://www.altfueltechnology.com/
Investor Relations
InvestSource Inc.
714-847-2460
Email Contact
Copyright 2009, Market Wire, All rights reserved.
-0-
Comments (0)
This discussion is now closed. We welcome comments on our articles for a limited period after their publication.


Follow Reuters