Atmel Introduces $29 Evaluation Kit for AVR XMEGA

SAN JOSE, Calif., Nov. 2 /PRNewswire-FirstCall/ -- Atmel® Corporation (Nasdaq:
ATML) today announced the availability of the Xplain evaluation kit for its
AVR® XMEGA(TM) microcontroller family. With a suggested resale price of $29
USD, this kit enables users the ability to evaluate features and system
performance of Atmel's XMEGA at a minimum hardware cost. The kit is powered
through a mini USB connector where end-users can develop their own
applications on XMEGA using Xplain. The 8-/16-bit XMEGA microcontrollers,
introduced in 2008, are optimized for ultra- low power and high system
performance with a very innovative and complete feature set well suited for a
wide range of applications.

Atmel's ATxmega128A1 is the onboard XMEGA device in the Xplain kit. The device
is a 100-pin, general purpose microcontroller with 128 KB of In-System
Programmable Flash memory and an 8 KB boot section in Flash that can also be
used as additional application memory. The ATxmega128A1 contains all features
available in the XMEGA family which includes, but is not limited to, a DMA
controller, Event System, 12-bit high speed analog peripherals, AES and DES
crypto module, external bus interface and all second-generation picoPower(TM)
features achieving the market's lowest power consumption microcontrollers.

For evaluation and development purposes, the Xplain kit contains a speaker
with an audio amplifier, a potentiometer and temperature sensor, which are all
connected to the 12-bit DAC or ADC on the ATxmega128A1 device. The external
memories include an 8 MB SDRAM and an 8 MB serial data Flash, and eight
buttons and eight LEDs for basic user interface and application interaction
are also available. Spare digital and analog pins on the ATxmega128A1 are
available through pin-headers for external analog input and output, digital
input and output, PWM, input capture, and USART, SPI and I2C-compatible TWI
communication.

The Xplain kit is shipped with basic code programmed into the ATxmega128A1 to
demonstrate the use of buttons, LEDs and the speaker on the kit. Documentation
includes a user guide, schematics and a full bill of materials available at:
http://www.atmel.com/Xplain. Additional code examples, good design practices
recommendations and general hints and tips are available as application notes
at: http://www.atmel.com/AVR.

Xplain supports other development tools from Atmel including the JTAGICE mkII
debugger, AVRISP mkII programmer and AVR Studio® - the free AVR IDE Software
Development Tool available at http://www.atmel.com/AVRStudio. By using these
tools with Xplain, users have the ability to do on-chip debugging or in-system
programming.

More information on the XMEGA microcontroller family is available at:
http://www.atmel.com/XMEGA.

Availability, Pricing and Photo
The Xplain kit is available now. Suggested retail price is $29 USD per kit.

To download a high-resolution of the Xplain board, please click the following
link: http://www.atmel.com/images/homepage_new/press/xplain_side.jpg.

About Atmel
Atmel is a worldwide leader in the design and manufacture of microcontrollers,
advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF)
components. Leveraging one of the industry's broadest intellectual property
(IP) technology portfolios, Atmel is able to provide the electronics industry
with complete system solutions focused on consumer, industrial, security,
communications, computing and automotive markets.

© 2009 Atmel Corporation. All Rights Reserved. Atmel®, Atmel logo and
combinations thereof, AVR, AVR Studio®, picoPower® and others are registered
trademarks, XMEGA(TM) and others are trademarks of Atmel Corporation or its
subsidiaries. Other terms and product names may be trademarks of others.

Information:
Atmel's Xplain product information is available at,
http://www.atmel.com/Xplain.
For further information on the AVR XMEGA product family, visit
http://www.atmel.com/XMEGA.

Atmel Press Contacts:
Clive Over, Director of Public Relations
+1 (408) 436 4305, Email: clive.over@atmel.com

SOURCE Atmel Corporation

Clive Over, Director of Public Relations, Atmel, +1-408-436-4305,
clive.over@atmel.com