Kimber Intercepts 7 Metres of 18.3 g/t Gold and 374.3 g/t Silver in New Structure Discovered at Monterde

Thu Jan 26, 2012 8:30am EST

* Reuters is not responsible for the content in this press release.

  VANCOUVER, BRITISH COLUMBIA, Jan 26 (MARKET WIRE) --
Kimber Resources Inc. (TSX:KBR)(NYSE Amex:KBX) is pleased to announce
ongoing drill results from an additional 14 drill holes at its Monterde
gold/silver project in Mexico, including eight holes drilled at Carmen
and six holes drilled at Veta Minitas. Of particular interest is drill
hole MTC-142A, which intersected a new structure containing 7 metres of
18.3 g/t gold and 374.3 g/t silver. This wide and high-grade gold-silver
intersection is located northeast of other known structures in the Carmen
deposit and is believed to be a parallel or semi-parallel structure to
the current structures that make up the Carmen deposit. The new structure
has been named "Cocos" and is geologically different from the other
structures at Carmen being characterized by bright white quartz and
quartz breccia, not the silicification seen in other gold-silver
mineralized structures at Carmen. In addition, from the review of Cocos
core samples, the base metal sulphides occur as thin veinlets and are
finer grained than the sulphides encountered in the Carmen structure in
hole MTRD-476 (which intersected 4.9 metres of 78.4 g/t gold and 127.9
g/t silver, as announced May 31, 2011). Also significant is hole MTRD-512
which intersected 8.6 g/t gold and 326.2 g/t silver over 5m in the
footwall of the Cob structure.

    "The discovery of a new structure containing high-grade gold-silver
mineralization further supports our view that Monterde has excellent
potential to host additional high-grade structures, both near Carmen and
in other areas of Monterde," reported Gordon Cummings, President and CEO
of Kimber. "Kimber's recent successes in identifying additional high
grade mineralization at deeper levels at Carmen, along with the discovery
of the new high-grade gold-silver Cocos structure, strongly support
Kimber's strategy to drill for growth at Monterde."

    Cocos is not known to outcrop at surface, suggesting the possibility of
additional concealed structures to host high-grade gold-silver. The
discovery of Cocos also extends the area for exploration at Carmen to the
northeast of all previously known structures in this area.

    Carmen Results

    Highlights of recent assay results from the Carmen deposit area are
tabulated below, while complete results for all drill holes are tabulated
at the end of this news release:


----------------------------------------------------------------------------
                                                                        Gold
                                   Intercept                      Equivalent
Drill                  From     To       (i)      Gold    Silver        (ii)
Hole       Section      (m)    (m)       (m)     (g/t)     (g/t)       (g/t)
----------------------------------------------------------------------------
MTC-142A        34    363.0  370.0       7.0      18.3     374.3        24.6
----------------------------------------------------------------------------
including       34    364.7  365.8       1.1      39.6     767.0        52.4
----------------------------------------------------------------------------
including       34    367.0  368.5       1.5      32.5     873.0        47.1
----------------------------------------------------------------------------
MTRD-512        37    324.3  329.3       5.0       8.6     326.2        14.1
----------------------------------------------------------------------------
MTC-147         33    475.7  477.5       1.8       9.9     416.0        16.8
----------------------------------------------------------------------------
MTC-148         27    476.7  486.2       9.5       5.2       2.7         5.3
----------------------------------------------------------------------------

(i) True widths are expected to range between 65% and 85% of the intervals  
reported on the table above.                                                
(ii) Gold equivalent grade assumes equivalence of 60 grams of silver to one 
gram of gold.                                                               


    High-grade gold-silver mineralization at Carmen, including the Cob, Hilos
and Cocos structures, remains open along strike and at depth, below the
existing mineral resource estimate. Additional drill targets have been
identified based on these results that are designed to further delineate
this mineralization and to trace it to depth. Drilling is continuing.

    Drill Hole details at Carmen

    MTC-142A

    The newly identified Cocos structure was intercepted in drill hole
MTC-142A. The hole was collared on section 34 and designed to test the
Carmen structure at the 1750 metre elevation level where mineralization
remains open.

    At the 2065 metre elevation level the hole cut a zone of intense quartz
veining and quartz breccia mineralized by veins of chalcopyrite, galena
and sphalerite associated with pyrite. This particular style of
mineralization had not been observed in any of the Carmen structures
before and returned 7.0 metres grading 18.3 g/t gold and 374.3 g/t
silver. The zone was encountered approximately 70 metres up-hole from the
Cob structure in an area of little previous drilling indicating the
possible discovery of a new mineralized zone in the hanging wall to Cob.
Additional drilling is planned to further test this new structure.

    Hole MTC-142A also intercepted numerous narrow mineralized zones,
including Cob and Hilos with grades of up to 6.3 g/t gold with widths
ranging from 0.8-2.0 metres. A hanging wall splay of Carmen returned 1.6
metres grading 4.5 g/t gold with low silver. The Carmen structure
returned anomalous gold values only.

    MTRD-512

    Drill hole MTRD-512 was collared on section 37 and designed to intersect
the Carmen structure at the 1660 metre elevation level. The hole returned
5.0 metres grading 8.6 g/t gold and 326.2 g/t silver from a footwall
structure to Cob. The Carmen structure returned 9.5 metres grading 0.8
g/t gold and anomalous silver.

    MTC-148

    Drill hole MTC-148 was collared on section 27 and designed to intersect
the Carmen structure at the 1730 metre elevation level. The hole returned
9.5 metres grading 5.2 g/t gold from the Carmen structure and continues
to extend mineralization at depth. A footwall structure to Carmen
returned 4.2 metres grading 4.0 g/t gold.

    MTC-147

    Drill hole MTC-147 was collared on section 33 and designed to test the
Carmen structure at the 1860 metre elevation level. The hole returned
14.1 metres grading 1.7 g/t gold and 35.2 g/t silver from the Cob
structure and 1.8 metres grading 9.9 g/t gold and 416 g/t silver from a
Hilos structure splay. The Carmen structure returned 8.0 metres grading
0.8 g/t gold with low silver.

    MTC-139A

    Drill hole MTC-139A was collared on section 29 and was designed to test
the Carmen structure at the 1850 metre elevation level. The hole
intersected a number of mineralized zones in the hanging wall to the Cob
structure. A highlight from the these structures was 3.6 metres grading
2.6 g/t gold and 96.1 g/t silver. The Cob structure returned 1.6 metres
grading 3.8 g/t gold with anomalous silver. The mineralization in these
zones consists of hematite and goethite hosted in strongly to patchy
silicified felsic pyroclastic flows. The hole intersected the Carmen
structure at the 1825 metre elevation level and returned 3.7 metres of
2.6 g/t gold and anomalous silver. Mineralization consists of mixed
sulphide and oxides occurring in veins and patches associated with
intense silicification.

    MTC-146

    Drill hole MTC-146 was collared on section 25 and designed to test the
Carmen structure at the 1890 metre elevation level. The hole intersected
several mineralized zones in the hanging wall to Carmen including 3.1
metres grading 3.8 g/t gold and 2.0 metres grading 7.9 g/t gold.

    MTC-141B

    Drill hole MTC-141-B was collared on section 33 and was designed to test
the Carmen structure at the 1715 metre elevation level. The hole
intersected the Cob structure and returned several mineralized zones,
including 3.9 metres grading 3.2 g/t gold and 40.9 g/t silver. The Carmen
structure returned only anomalous gold and silver values associated with
weak silicification. A hanging wall structure 14 metres above Carmen
returned 1.6 metres of anomalous gold and 159 g/t silver with strongly
anomalous tungsten, an association not previously observed at Carmen.

    MTC-143

    Drill hole MTC-143 was collared on section 30 and designed to test the
Carmen structure at the 1730 metre elevation level. The hole returned 0.9
metres grading 1.8 g/t gold and low silver.

    Veta Minitas

    A total of 6 diamond drill holes were completed on the Las Minitas
deposit during the current disclosure period. Las Minitas is a satellite
deposit to the Carmen deposit and occurs 250 metres to the west.
Mineralized structures at Veta Minitas are characterized by closely
spaced, narrow vertical faults hosted in felsic pyroclastic tuffs and
breccias. Mineralization occurs as hematite and goethite with minor
limonite associated with zones of variable silicification. Results for
the current period are provided in the table at the end of this release.

    Illustrations

    Plan View of Carmen Showing Drill Hole Locations:
http://media3.marketwire.com/docs/kbr-0126-map1.pdf.

    Vertical Section 34 Showing Hole MTC-124A and Cocos Structure:
http://media3.marketwire.com/docs/kbr-0126-map2.pdf.

    About Kimber

    Kimber owns mineral concessions covering in excess of 39,000 hectares in
the prospective Sierra Madre gold-silver belt, including the Monterde
property, where three gold-silver mineral resources have already been
defined. The most advanced of these, the Carmen deposit, has been
extensively drilled and has undergone detailed geologic modeling. The
completion of the Updated Preliminary Economic Assessment for Monterde in
2011 represented a significant step forward for Kimber and supports
further development and more advanced economic studies at the Monterde
deposits. The subsequent discovery of high grade gold-silver
mineralization below the mineral resources used in the preliminary
economic assessment adds a potentially significant new dimension to the
opportunities at Monterde.

    Forward looking statements

    Statements in this release may be viewed as forward-looking statements,
including statements regarding estimates of mineral resources at
Monterde, the preliminary economic assessment of the Monterde project,
the conversion of inferred mineral resources to measured and indicated
mineral resources, the conversion of mineral resources to mineral
reserves, life of mine estimates, the potential for gold and silver
mineral resources in the Carmen and Veta Minitas deposits and other
targets within the Monterde project, the implications of the results of
drill holes reported herein, the results of future exploration, the
economic potential of any such discoveries made, the further development,
expected results and future economic assessments of the Monterde project.
When used in this press release, the words "expect", "intend", "hopes",
"should", "believe", "may", "will", "if", "anticipates", "potential for",
"potentially", "suggests" and similar expressions are intended to
identify forward-looking statements. Such statements involve risks and
uncertainties that could cause actual results to differ materially from
those projected. Such risks and uncertainties include, among others,
uncertainty of mineral reserve and resource estimates, continuity of
mineralization between drill holes, risks relating to fluctuations in the
price of gold, the inherently hazardous nature of mining-related
activities, potential effects on Kimber's operations of environmental
regulations in the countries in which it operates, risks due to legal
proceedings, risks relating to political and economic instability in
certain countries in which it operates, risks related to the use of
inferred mineral resources in the preliminary economic assessment, and
uncertainty of being able to raise capital on favourable terms or at all,
as well as those risk factors discussed under the headings "Cautionary
Note Regarding Forward-Looking Statements" and "Risk Factors" in Kimber's
latest Annual Report on Form 20-F as recently filed on SEDAR and EDGAR.
There are no assurances the Company can fulfil such forward-looking
statements and the Company undertakes no obligation to update such
statements, except as required by law. Such forward-looking statements
are only predictions; actual events or results may differ materially as a
result of risks facing the Company, some of which are beyond the
Company's control.

    Quality Assurance/Quality Control

    The technical information in this news release has been prepared in
accordance with Canadian regulatory requirements set out in National
Instrument 43-101 and reviewed and approved by Mr. Petrus (Marius) Mare
P.Geo., Vice-President Exploration of the Company. The exploration
activities at the Monterde project site are carried out under the
supervision of Mr. Mare, who is the designated Qualified Person under
National Instrument 43-101 for the Monterde project and is responsible
for quality control at Monterde and has verified the data being disclosed
herein. He has determined that the laboratory reports matched the drill
sample logs and that the quality control assays fall within reasonable
limits. QA/QC procedures incorporate blanks and duplicates inserted at
the drill and standards inserted after sample preparation. Sample
preparation was done by ALS Chemex at its Chihuahua laboratory. Pulps are
analyzed by ALS Chemex at its laboratory in North Vancouver, British
Columbia, using 50 gram sub-samples, using fire assay with an AA finish
for gold and four-acid digestion and ICP finish for silver from a 0.4
gram subsample. High grade gold or silver intervals are re-assayed by
fire assay with gravimetric finish.

    Cautionary Note to U.S. Investors - The United States Securities and
Exchange Commission permits U.S. mining companies, in their filings with
the SEC, to disclose only those mineral deposits that a company can
economically and legally extract or produce. Kimber Resources uses
certain terms in this news release and on its website, such as
"measured", "indicated", and "inferred", "mineral resources", which the
SEC guidelines strictly prohibit U.S. companies from including in their
filings with the SEC. U.S. Investors are urged to consider closely the
disclosure under the heading "Cautionary Note to U.S. Investors Regarding
Mineral Reserve and Resource Estimates" in our latest annual report on
Form 20-F which may be secured from us, or from the SEC's website at
http://www.sec.gov/edgar.shtml.


Complete table of Carmen drill results:                                     

----------------------------------------------------------------------------
                                   Inter-              Gold                 
                                    cept             Equiva-               
Drill                  From     To   (i)  Gold Silver  lent                 
Hole       Section      (m)    (m)   (m) (g/t)  (g/t) (g/t)        Structure
----------------------------------------------------------------------------
MTC-139A        29    133.9  135.7   1.8   0.1   54.0   1.0          Unknown
----------------------------------------------------------------------------
and                   139.3  142.6   3.3   0.0   50.3   0.9          Unknown
----------------------------------------------------------------------------
and                   168.4  169.9   1.5   0.3   46.6   1.1          Unknown
----------------------------------------------------------------------------
and                   316.2  320.3   4.1   0.6   42.3   1.3          Unknown
----------------------------------------------------------------------------
and                   325.2  326.5   1.3   2.6   82.3   4.0          Unknown
----------------------------------------------------------------------------
and                   331.9  339.1   7.2   1.5   56.9   2.5          Unknown
----------------------------------------------------------------------------
including             335.5  339.1   3.6   2.6   96.1   4.2          Unknown
----------------------------------------------------------------------------
and                   434.6  436.2   1.6   3.8    3.6   3.8              Cob
----------------------------------------------------------------------------
and                   543.9  546.3   2.4   1.2    0.8   1.2  Carmen HW Splay
----------------------------------------------------------------------------
and                   568.6  572.3   3.7   2.6    5.5   2.7           Carmen
----------------------------------------------------------------------------
including             568.5  569.7   1.2   6.3   14.9   6.5           Carmen
----------------------------------------------------------------------------
MTC-141B        33    244.6  251.6   7.0   1.1   45.9   1.9              Cob
----------------------------------------------------------------------------
including             250.7  251.6   0.9   7.6   66.0   8.7              Cob
----------------------------------------------------------------------------
and                   254.2  266.6  12.4   1.2   42.4   1.9              Cob
----------------------------------------------------------------------------
including             259.4  263.3   3.9   3.2   40.9   3.9              Cob
----------------------------------------------------------------------------
and                   269.3  273.9   4.6   0.3   41.7   1.0     Cob FW Splay
----------------------------------------------------------------------------
and                   299.9  307.5   7.6   0.7   15.7   0.9     Cob FW Splay
----------------------------------------------------------------------------
and                   329.0  331.0   2.0   5.0   22.7   5.4     Cob FW Splay
----------------------------------------------------------------------------
and                   421.7  422.9   1.2   0.9    4.4   1.0   Hilos HW Splay
----------------------------------------------------------------------------
and                   440.4  441.9   1.5   1.1    3.5   1.2            Hilos
----------------------------------------------------------------------------
and                   616.5  618.3   1.8   0.0  159.0   2.7           Carmen
----------------------------------------------------------------------------
MTC-142A        34    328.5  331.5   3.0   2.8   49.0   3.6   Cocos HW Splay
----------------------------------------------------------------------------
and                   363.0  370.0   7.0  18.3  374.3  24.6            Cocos
----------------------------------------------------------------------------
including             364.7  365.8   1.1  39.6  767.0  52.4            Cocos
----------------------------------------------------------------------------
including             367.0  368.5   1.5  32.5  873.0  47.1            Cocos
----------------------------------------------------------------------------
and                   445.0  447.0   2.0   0.5   24.7   0.9     Cob FW Splay
----------------------------------------------------------------------------
and                   449.0  450.0   1.0   4.6   12.5   4.8     Cob FW Splay
----------------------------------------------------------------------------
and                   530.5  531.5   1.0   3.0    1.2   3.0          Unknown
----------------------------------------------------------------------------
and                   571.5  572.3   0.8   5.1   44.5   5.8            Hilos
----------------------------------------------------------------------------
and                   577.7  579.0   1.3   6.3    1.3   6.3            Hilos
----------------------------------------------------------------------------
and                   615.9  616.7   0.8   2.3   23.6   2.7   Hilos FW Splay
----------------------------------------------------------------------------
and                   619.2  620.7   1.5   1.5    4.9   1.6   Hilos FW Splay
----------------------------------------------------------------------------
and                   646.6  648.2   1.6   4.5    2.5   4.5  Carmen HW Splay
----------------------------------------------------------------------------
MTC-143         30    135.7  138.9   3.2   0.1  212.0   3.6          Unknown
----------------------------------------------------------------------------
including             135.7  137.3   1.6   0.1  347.0   5.9          Unknown
----------------------------------------------------------------------------
and                   156.1  163.3   7.2   0.1   35.9   0.7          Unknown
----------------------------------------------------------------------------
and                   462.3  463.5   1.2   0.4  109.0   2.2              Cob
----------------------------------------------------------------------------
and                   675.6  676.5   0.9   1.8    1.0   1.8  Carmen HW Splay
----------------------------------------------------------------------------
MTC-146         25     63.3   65.0   1.7   0.1   37.7   0.8          Unknown
----------------------------------------------------------------------------
and                    74.0   80.0   6.0   0.2   94.1   1.8          Unknown
----------------------------------------------------------------------------
including              75.5   78.5   3.0   0.3  144.5   2.8          Unknown
----------------------------------------------------------------------------
and                   420.3  437.0  16.7   1.1    3.1   1.1  Carmen HW Splay
----------------------------------------------------------------------------
including             420.3  423.4   3.1   3.8    8.0   3.9  Carmen HW Splay
----------------------------------------------------------------------------
and                   443.0  445.0   2.0   7.9    1.6   8.0  Carmen HW Splay
----------------------------------------------------------------------------
and                   449.0  451.0   2.0   3.5    2.5   3.5  Carmen HW Splay
----------------------------------------------------------------------------
and                   457.0  462.5   5.5   0.5    1.6   0.5  Carmen HW Splay
----------------------------------------------------------------------------
MTC-147         33    155.0  160.9   5.9   0.6   37.4   1.2          Unknown
----------------------------------------------------------------------------
including             158.7  159.8   1.1   1.7  171.0   4.6          Unknown
----------------------------------------------------------------------------
and                   269.3  270.7   1.4   0.2  104.0   1.9          Unknown
----------------------------------------------------------------------------
and                   301.0  307.7   6.7   0.1   50.2   0.9     Cob HW Splay
----------------------------------------------------------------------------
and                   322.2  328.0   5.8   0.1   42.8   0.8     Cob HW Splay
----------------------------------------------------------------------------
and                   354.0  361.3   7.3   0.7   46.4   1.5     Cob HW Splay
----------------------------------------------------------------------------
including             358.4  360.0   1.6   2.2   50.7   3.0     Cob HW Splay
----------------------------------------------------------------------------
and                   365.2  379.3  14.1   1.7   35.2   2.3              Cob
----------------------------------------------------------------------------
including             367.8  368.8   1.0  12.9   52.5  13.7              Cob
----------------------------------------------------------------------------
and                   417.8  418.9   1.1   3.6    8.7   3.7     Cob FW Splay
----------------------------------------------------------------------------
and                   425.2  426.8   1.6   3.3   11.5   3.5     Cob FW Splay
----------------------------------------------------------------------------
and                   475.7  477.5   1.8   9.9  416.0  16.8   Hilos HW Splay
----------------------------------------------------------------------------
and                   602.0  610.0   8.0   0.8    3.5   0.9           Carmen
----------------------------------------------------------------------------
including             602.0  603.2   1.2   3.8   13.1   4.0           Carmen
----------------------------------------------------------------------------
and                   719.0  720.0   1.0  13.1   12.4  13.3  Carmen FW Splay
----------------------------------------------------------------------------
MTC-148         27    476.7  486.2   9.5   5.2    2.7   5.3           Carmen
----------------------------------------------------------------------------
including             484.4  486.2   1.8  21.1    9.8  21.3           Carmen
----------------------------------------------------------------------------
and                   562.3  566.5   4.2   4.0    1.5   4.0  Carmen FW Splay
----------------------------------------------------------------------------
including             565.0  566.5   1.5   9.6    1.3   9.7  Carmen FW Splay
----------------------------------------------------------------------------
MTRD-512        37    265.7  282.4  16.7   0.6  101.1   2.3     Cob HW Splay
----------------------------------------------------------------------------
including             274.9  279.4   4.5   1.7  162.5   4.4     Cob HW Splay
----------------------------------------------------------------------------
and                   297.9  311.0  13.1   0.6   18.9   1.0              Cob
----------------------------------------------------------------------------
and                   324.3  329.3   5.0   8.6  326.2  14.1     Cob FW Splay
----------------------------------------------------------------------------
including             327.7  329.3   1.6  26.0  998.0  42.6     Cob FW Splay
----------------------------------------------------------------------------
and                   431.1  431.8   0.7   1.0    2.6   1.1          Unknown
----------------------------------------------------------------------------
and                   878.0  887.5   9.5   0.8    0.6   0.8  Carmen FW Splay
----------------------------------------------------------------------------

(i) True widths are expected to range between 65% and 85% of the intervals  
reported on the table above.                                                
(ii) Gold equivalent grade assumes equivalence of 60 grams of silver to one 
gram of gold.                                                               


Complete table of Veta Minitas drill results:

----------------------------------------------------------------------------
                                                                        Gold
                                   Intercept                      Equivalent
Drill                  From     To       (i)      Gold    Silver        (ii)
Hole       Section      (m)    (m)       (m)     (g/t)     (g/t)       (g/t)
----------------------------------------------------------------------------
LMRD-57         33     24.0   26.0       2.0       0.4     101.0         2.0
----------------------------------------------------------------------------
and                    42.0   50.0       8.0       1.0      43.8         1.7
----------------------------------------------------------------------------
including              42.0   44.0       2.0       2.5      60.3         3.5
----------------------------------------------------------------------------
and                   230.0  234.5       4.5       0.3      51.2         1.2
----------------------------------------------------------------------------
LMRD-58         35    183.6  187.5       3.9       0.1      41.0         0.8
----------------------------------------------------------------------------
and                   199.5  209.3       9.8       0.4      67.9         1.5
----------------------------------------------------------------------------
including             202.8  204.8       2.0       1.3     142.0         3.7
----------------------------------------------------------------------------
and                   258.9  261.6       2.7       1.6      85.6         3.0
----------------------------------------------------------------------------
including             260.2  261.6       1.4       2.9     115.0         4.9
----------------------------------------------------------------------------
and                   354.7  361.5       6.8       0.4     123.3         2.4
----------------------------------------------------------------------------
including             356.5  358.0       1.5       1.1     298.0         6.1
----------------------------------------------------------------------------
and                   392.5  394.0       1.5       3.4       3.4         3.5
----------------------------------------------------------------------------
and                   407.0  408.3       1.3       0.4      77.8         1.7
----------------------------------------------------------------------------
LMRD-59         37    357.4  359.5       2.1       2.4      10.9         2.5
----------------------------------------------------------------------------
including             357.4  358.4       1.0       4.5      18.2         4.8
----------------------------------------------------------------------------
LMRD-60         38    348.7  350.0       1.3       1.4      13.9         1.6
----------------------------------------------------------------------------
and                   353.3  359.1       5.8       1.8       7.6         1.9
----------------------------------------------------------------------------
including             353.3  354.4       1.1       4.3       6.2         4.4
----------------------------------------------------------------------------
LMRD-61               142.0  156.0      14.0       0.4      77.7         1.7
----------------------------------------------------------------------------
including             148.0  150.0       2.0       1.1     107.0         3.0
----------------------------------------------------------------------------
including             152.0  154.0       2.0       1.4     125.0         3.5
----------------------------------------------------------------------------
and                   188.0  196.0       8.0       2.7     113.4         4.6
----------------------------------------------------------------------------
including             190.0  194.0       4.0       4.9     175.0         7.7
----------------------------------------------------------------------------
and                   256.0  261.9       5.9       2.7      47.1         3.4
----------------------------------------------------------------------------
and                   301.2  304.2       3.0       1.6      29.6         2.1
----------------------------------------------------------------------------
and                   322.3  325.5       3.2       2.1      72.9         3.3
----------------------------------------------------------------------------
and                   328.6  329.7       1.1       0.5      69.4         1.6
----------------------------------------------------------------------------
and                   339.3  340.8       1.5       2.1      48.9         3.0
----------------------------------------------------------------------------
LMRD-74         37    319.7  321.3       1.6       1.2      18.1         1.5
----------------------------------------------------------------------------
and                   381.4  382.8       1.4       1.8       9.1         2.0
----------------------------------------------------------------------------

(i) True widths are expected to range between 65% and 85% of the intervals  
reported on the table above.                                                
(ii) Gold equivalent grade assumes equivalence of 60 grams of silver to one 
gram of gold.                                                               




Contacts:
Kimber Resources Inc.
Renee Brickner
Vice President, Investor Relations
(604) 669-2251 or North America Toll Free: 1-866-824-1100

Kimber Resources Inc.
Gordon Cummings, CA
President and CEO
(604) 669-2251 or North America Toll Free: 1-866-824-1100
(604) 669-8577 (FAX)
news@kimberresources.com
www.kimberresources.com

Copyright 2012, Market Wire, All rights reserved.

-0-
Comments (0)
This discussion is now closed. We welcome comments on our articles for a limited period after their publication.