Operator at Japan's Fukushima starts hazardous year-long fuel removal

TOKYO Mon Nov 18, 2013 6:33am EST

1 of 5. Workers wearing protective suits and masks carry out an operation to remove fuel rods from a spent fuel pool inside the No.4 reactor building at Tokyo Electric Power Co's (TEPCO) Fukushima Daiichi nuclear power plant in Fukushima prefecture November 18, 2013, in this handout photograph taken and released by TEPCO.

Credit: Reuters/Tokyo Electric Power Co/Handout via Reuters

TOKYO (Reuters) - The operator of Japan's wrecked Fukushima nuclear plant took the first step on Monday in the long and hazardous process of decommissioning the facility, extracting four fuel rods from their container for later removal.

Tokyo Electric Power Co, known as Tepco, said it transferred the rods to a steel cask within the same cooling pool in a badly damaged reactor building, beginning the delicate and unprecedented task of removing 400 tonnes of highly irradiated spent fuel from that reactor.

"We will continue with the work from tomorrow and proceed, paying close attention to safety," Tepco said in a statement.

While battling leaks of radiation-contaminated water around the plant, which was knocked out by Japan's mammoth March 2011 earthquake and tsunami, Tepco has embarked on decommissioning four reactors at the Fukushima Daiichi plant. That task is likely to take decades and cost tens of billions of dollars.

The company must carefully pluck more than 1,500 brittle and potentially damaged assemblies from the unstable reactor No. 4. Tepco estimates that removing all the rods from the reactor will take a year, although some experts say that is an ambitious target.

The cask holds 22 rods. Transferring this first batch will take about two days and it will take about a week to get the cask to the common storage pool in another building, a Tepco spokesman said.

Moving them is urgent because they are being stored 18 meters (59 feet) above ground level in a building that has buckled and tilted and could collapse if another quake strikes.

Removing the rods have been likened to taking cigarettes out of a crushed pack.

If the rods are exposed to air or if they break, huge amounts of radioactive gases could be released into the atmosphere. There are 50-70 in each of the assemblies, which weigh around 300 kg (660 pounds) and are 4.5 meters (15 feet) long.

(Reporting by Yuka Obayashi and Aaron Sheldrick; Editing by William Mallard and Ron Popeski)

We welcome comments that advance the story through relevant opinion, anecdotes, links and data. If you see a comment that you believe is irrelevant or inappropriate, you can flag it to our editors by using the report abuse links. Views expressed in the comments do not represent those of Reuters. For more information on our comment policy, see http://blogs.reuters.com/fulldisclosure/2010/09/27/toward-a-more-thoughtful-conversation-on-stories/
Comments (1)
wannmann wrote:
Fukushima fiasco: Tokyo Electric’s risky removal of radioactive fuel could set off uncontrolled chain reaction; emergency delay invoked

November 18, 2013 NaturalNews

All that is required for a runaway nuclear meltdown is for one of the fuel rods to be dropped or accidentally placed too close to other fuel rods.

Fukushima reactor No. 4 currently has 1300 fuel rods being stored in a leaking pool held 150 feet above ground. There are 6,300 fuel rods in a nearby storage fuel that also need to be moved. In all, Fukushima holds 11,400 fuel rods, any one of which could break and send the entire situation spiraling out of control.

The idea that Tokyo Electric is going to use robotic cranes to somehow remove all these fuel rods without damaging, breaking or misplacing any of these rods seems almost impossible.

Nov 18, 2013 10:35am EST  --  Report as abuse
This discussion is now closed. We welcome comments on our articles for a limited period after their publication.

Photo

California's historic drought

With reservoirs at record lows, California is in the midst of the worst drought in decades.  Slideshow