Intel readies 3D-printed robots for handy consumers

RANCHO PALOS VERDE California Wed May 28, 2014 9:03pm EDT

Intel's Jimmy the Robot is shown in this publicity photo released to Reuters May 28, 2014. REUTERS/Intel/Handout via Reuters

Intel's Jimmy the Robot is shown in this publicity photo released to Reuters May 28, 2014.

Credit: Reuters/Intel/Handout via Reuters

Related Topics

RANCHO PALOS VERDE California (Reuters) - Intel Corp introduced a walking, talking robot on Wednesday made from 3D-printed parts that will be available to consumers later this year, if they are willing to assemble it with a kit that costs around $1,600.

The company's Chief Executive Brian Krzanich was accompanied by "Jimmy" on stage at the Code Conference in Rancho Palos Verdes, California. The white 2-foot tall robot shuffled onto the stage, introduced itself and then waved its arms.

Intel describes Jimmy as a research robot, but the company intends to make 3D-printable plans available without charge for a slightly less advanced version, and partners will sell components that cannot be 3D-printed, such as motors and an Intel Edison processor, in kits.

Jimmy can be programmed to sing, translate languages, send tweets and even serve a cold beer.

Under Krzanich, who took over a year ago, the chipmaker is trying to be an early player in emerging technologies like smart clothing, after coming late to the mobile revolution and making little progress in smartphones and tablets.

Its strategy includes engaging tech-savvy do-it-yourselfers and weekend hobbyists working on everything from Internet-connected baby blankets to robots and drones.

Owners of the robots will be able to program them to perform unique tasks. They can then share the programs with other owners as downloadable apps.

Intel, based in Santa Clara, California, hopes the price for the robot kits will fall below $1,000 within five years.

Separately on Wednesday, entrepreneur Bill Gross announced plans for a 3D printer that would sell for $149, far less than devices that now typically sell for $1,000 or more.

(Reporting by Noel Randewich and Alexei Oreskovic)

We welcome comments that advance the story through relevant opinion, anecdotes, links and data. If you see a comment that you believe is irrelevant or inappropriate, you can flag it to our editors by using the report abuse links. Views expressed in the comments do not represent those of Reuters. For more information on our comment policy, see
Comments (2)
markhahn wrote:
zzz. so much of the 3d-printing coverage, like this, is just hype, where the printed components could just as easily be fabed by traditional methods.

May 28, 2014 9:27pm EDT  --  Report as abuse
afoose wrote:
Right, I could send my parts to a machine shop and wait a few days and pay a machinist 75$/hr for a test part, or I could send it to my printer for almost nothing and get in a few hours. Even if I wanted to cut metal myself, I would have to order material, wait, set up the machine, fixture, and then cut. That process takes hours if not days.

3D printing allows me to waste less time and money ironing out design flaws that would be extremely expensive if I fab-ed them with traditional methods.

Jun 01, 2014 4:06pm EDT  --  Report as abuse
This discussion is now closed. We welcome comments on our articles for a limited period after their publication.